When reading online, it’s likely you have stumbled across the word bioload.
Confused, you likely Googled “What is bioload?”
Well, at the time of writing this, there wasn’t an article that answered this question.
Seeing this, I decided to create one myself.
So, let’s jump right into it…
What is bioload?
Bioload is short for biological load, but unless you read scientific papers, it is unlikely you will ever come across it written like this. In over 30 years of fish keeping, I have only ever heard it referred to as bioload.
So, what is bioload?
Where does this waste come from?
Fish, shrimp, snails, plants, corals, even bacteria and other microorganisms you can’t see…
If it’s alive, it’s going to add waste to your aquarium.
A couple of common types of waste include:
- Uneaten food
- Decaying plant matter
- Fish breathing
- Any other type of waste
All this waste is collectively referred to as bioload.
How does bioload relate to your aquarium?
In the natural environment, new water is constantly entering the fish’s habitat. Whether that’s through water flowing from upstream or ocean currents, waste does not have an opportunity to accumulate.
Now, let’s come back to your aquarium…
Your aquarium is filled with a small amount of water – and that’s all it gets. Except for a water change every now and again, no new water enters the tank.
So, a filter is used to recycle the water, cleaning it before it returns to the tank.
In a perfect world, a filter would clean 100% of the water – returning it to the state it was in when it first entered the tank.
But as we all know, neither the world nor filters are perfect.
In an aquarium setting, your fish sit in a pool of their own waste.
And, just how much waste is determined by your filter.
This is where bioload comes into play.
If the bioload in your tank is too high, your filter will be unable to keep up with the amount of waste.
The capabilities of the filter are what limit the amount of fish and other live plants and creatures that you can keep in your aquarium.
Your filter needs to not only trap waste but also hold enough bacteria to process ammonia and nitrites.
Related – How to cycle aquarium faster?
How do you determine the bioload of your aquarium?
Here is where it gets a little more complicated.
The bioload varies from fish to fish.
- Large-sized fish have a big bioload.
- Small-sized fish have a tiny bioload.
However, this is also impacted by…
- Whether the fish is a meat eater or plant eater,
- How efficient the fish’s digestive system is, and
- How much the fish eats.
Of course, the more fish in the tank, the higher the bioload.
Let’s use a 30-gallon tank as an example…
A filter that works for 30 zebra danios will not be able to keep up with 10 gold fish – the gold fish eat and poop a whole lot more than the danios.
This brings me to the frustrating thing about bioload…
There is currently no effective way to calculate the bioload of each fish.
There isn’t even a standard unit of bioload measurement.
Yep, you read that right.
You see, bioload is more of an unofficial term used by aquarists when describing how to stock a tank.
When it comes to determining bioload, it comes down to experience.
In some instances, identifying a high bioload will be obvious – you can’t keep 10 goldfish in a 10-gallon tank.
But when it comes to mixing multiple species of fish in the same tank, the answer will vary according the person you are speaking to.
While there are calculators available to help you determine the bioload of fish before buying them, these are often criticized for their accuracy and lack of data.
I hate to break it to you, but determining bioload often comes down to trial and error.
Fortunately, there are many experts who have already done this trial and error themselves…
There are plenty of people in online forums, hobbyist groups and even the staff at your local fish store who will be able to point you in the right direction regarding an appropriate bioload for your aquarium.
How to test the bioload in your aquarium
The end goal is to avoid having a bioload that is too high for your tank…
If the bioload is creating more waste than your system can handle, then you will throw the nitrogen cycle out of balance, leading to constant problems in your aquarium.
You will know that the bioload in your aquarium is too high when ammonia and nitrites are being produced faster than the bacteria in your filter can convert them to nitrates.
Fortunately, this is relatively easy to test for, since ammonia and nitrite levels should be 0 ppm.
Any indications of ammonia or nitrites – After your tank has cycled, of course – could clue you in that the bioload is too large for your aquarium.
If this is the case, you have two options…
- Get a larger filter or
- Get rid of some fish.
I know it can be painful to say goodbye to your pets, but it will be worth it in the long run. The remaining fish will be much healthier because of it.
Your only other choice is a larger filtration system. This can be quite an expensive option depending on the size of filter required.
At the end of the day, you should consider your tank’s bioload in relation to all the other cycles that are occurring inside your tank.
Doing so will ensure that you are putting all the puzzle pieces together, allowing you to raise happy and healthy fish.
Do you have any more advice to share on bioloads? Let me know in the comments below!
I’ve been keeping fish for over 30 years and currently have 4 different aquariums – it’s an addiction. I’m here to teach you everything there is to know about fishkeeping.
I also use this site as an excuse to spend lots of money on testing and reviewing different aquarium products! You can find my reviews here.